Home › Guides › Discharging lighting conditions

How to discharge an external lighting planning condition

What a lighting condition means, what details councils expect to see, how to apply to discharge it, and how to avoid a refusal or delay.

By Alkesh Gorsia CEng MIET, ILP registered · Updated November 2026

Many planning permissions include a condition like this:

"No external lighting shall be installed on the site until details of the type, location, height, design and luminance of the lighting, together with a lux contour plan and hours of operation, have been submitted to and approved in writing by the Local Planning Authority. The lighting shall be installed and maintained in accordance with the approved details."

Wording varies, but the meaning is the same: you can't put up external lights until the council has approved a lighting scheme. To get that approval you submit an application to discharge the condition, often called an application for approval of details reserved by condition.

What the council will want to see

Read the exact wording of your condition and make sure every item is covered. Most lighting conditions ask for some or all of:

  • A lighting layout showing the position of every light
  • Mounting heights and tilt angles
  • Fitting details: manufacturer, model, light output, wattage and colour temperature
  • A lux contour plan showing light levels, especially at the site boundary
  • Hours of operation, with timers, sensors, dimming or curfew times
  • Mitigation: shields, louvres, cowls and no upward light
  • Measures for bats or other wildlife, if the condition was added on ecology grounds

If the condition refers to a document, such as an ecology report or a lighting strategy approved with the application, your scheme must follow it.

Get an instant fixed price using LuxQuotesAnswer a few questions and see your fixed price in about a minute.

Get my fixed price

How to apply

  1. Get the lighting scheme designed and a report prepared that addresses each part of the condition.
  2. Apply to the council. In England and Wales this is usually done through the Planning Portal using the approval of details reserved by condition form, with the fee for discharging conditions. Scotland and Northern Ireland have their own online portals.
  3. Quote the condition number and planning reference clearly in your covering letter.
  4. Respond quickly if the case officer or ecologist asks questions.
  5. Install exactly what was approved. Changing fittings later may mean another submission.

Why lighting condition submissions get rejected

  • Manufacturer layouts showing light on the ground only, with no boundary or window checks
  • Cool white (4000K or more) fittings in bat-sensitive areas
  • Floodlights tilted upwards, causing glare and sky glow
  • No hours of operation or controls stated
  • Lighting shown over hedgerows or trees the ecologist asked to keep dark

Our reports deal with all of these from the start and are signed off by a Chartered Engineer. Choose "Discharging a planning condition" in the quote and paste your condition wording when you book. Get an instant fixed price using LuxQuotes.

Frequently asked questions

Can I install lights before the condition is discharged?

No. If the condition says no external lighting may be installed until details are approved, installing lights first is a breach of condition and the council can take enforcement action. With some conditions, it can also put the whole permission at risk.

How long does the council take to discharge a condition?

In England the council should normally decide within 8 weeks of a valid application, though times vary. Submitting complete, clear information first time is the best way to avoid delays.

Do I need to include the exact light fittings?

Usually yes. Most lighting conditions ask for the type, position, height, colour temperature and output of each fitting, plus the light levels produced, so the council knows exactly what will be installed.

Get an instant fixed price using LuxQuotesAnswer a few questions and see your fixed price in about a minute.

Get my fixed price